CONCRETE RESURFACING is a cost-effective way to extend the life of your concrete surfaces. With this procedure, you can resurface your driveway, garage floor or any other concrete surface in your home.
What Is Concrete Resurfacing?
Concrete resurfacing is a process of repairing and restoring concrete surfaces. Concrete resurfacing can be done with various materials, such as bituminous overlays, recycled rubber topping and epoxy sealers. While it may seem like new technology, concrete resurfacing isn’t new; it has been used for many years! Concrete resurfacing involves the application of a new surface to old concrete.
Concrete resurfacing has many advantages over simply replacing old concrete: it’s more cost-effective than replacement and provides better aesthetics than painting or staining an existing surface would do.
Which Areas Should Resurface?
If a concrete surface is in bad shape and you want to restore it, resurfacing is the best solution. However, many factors determine whether or not your concrete needs to resurface.
- Driveways: If you have a driveway leading up to your house or business, this area should always resurface if it shows signs of wear and tear. It can include cracks in the surface, uneven surfaces and potholes.
- Patios: If gaps in your deck or footpaths aren’t too broad (less than 1cm), they may just need some repairs instead of completely replacing them with new concrete slabs.
- Car parks: The same thing goes for car parks as patios – small cracks can easily repair without having to lay down entire slabs again. Just check out these other tips on how to repair concrete cracks before deciding whether it’s worth replacing them entirely!
- Pathways & walkways: Pathways get used much more frequently than driveways, so they tend to show signs of wear quicker too! However, they don’t necessarily need complete replacement either – depending on what damage has been done throughout its lifetime thus far will depend on how much work needs to be done now. Sometimes, just one patch job might suffice, but other times only partial resurfacing jobs will suffice, depending on the severity of damage done over time.
What Are The Preparations Before Concrete Resurfacing?
Before you begin, it’s best to have the surface free of all weeds and grasses. It’s also best to remove any dirt, dust and debris on your driveway, patio or walkway. You can wash the concrete with hot water using a garden hose. It would help if you used a pressure washer to further clean the surface. It will help ensure that you have a clean surface for applying the sealer and resurfacing product.
When preparing for your project, many things need doing, such as removing weeds from your driveway or patio and cleaning up any dirt from your driveway or patio with hot water, followed by pressure washing. So that there is no debris left behind when applying our resurfacing product, which ensures it goes on smoothly without clumps forming, which would cause poor results when finished curing in full sunlight over 72 hours!
What Are Concrete Advantages?
Concrete is a very cost-effective material. It means that it will save you money over time because it does not need to replace as often as other materials such as wood or metal would need to replace. Concrete also has many different uses and applications, making it possible for you to get the most value out of your investment compared to other materials like wood or metal.
Concrete can be made in any colour or texture, making it easy to create a wide range of designs depending on the look you wish your home or business property to have. The best part about using concrete surfaces is that there are no limitations when designing them; this makes them perfect for creating unique designs without worrying about having enough on-site space where construction would otherwise take place!
Kinds Of Resurfacing:
Resurfacing can be done with various materials, including concrete, brick, stone and tile. It is essential to choose suitable material for the job. The material should match the existing surface so that you do not have to worry about any problems down the road.
The resurfacing area must also be adequately prepared before any work begins. The surface must be dry and free of dirt, dust and debris before applying any sealant or coating products onto your surface. Any cracks or holes in the concrete should be filled with a cement patching compound compatible with the existing concrete surface and will not crack or shrink as it dries. It is essential because any cracks in the surface could cause water to seep into them and cause additional damage to your home’s foundation.
Cost Of Concrete Resurfacing:
The cost of resurfacing depends on several factors.
- The area is to resurface. The larger the size, the higher the cost will be.
- The material resurfacing your concrete surface can vary from sand to limestone and more!
- How much damage is there to your existing concrete surface (a rough and cracked surface may require more preparation before applying a new layer)?
- The amount of labour involved with removing old sealer/stain or cleaning off debris before applying a new layer; can vary depending on how many coats are needed to achieve desired results (and whether they’re applied by hand or machine).
- Types of equipment used during the installation process – depending on what type(s) exist within each company’s fleet, that might include power tools and specialized equipment like jackhammers, etcetera. It could take some time as well, so it’s a good idea to start collecting quotes early on when considering getting done here because if done too late, it might end up costing even more money than expected due).
So, if you have concrete that needs resurfacing in Melbourne and wants to learn more about it, we hope this post has helped you. Please get in touch with us to talk through your options. We’re always happy to help!
Where To Find The Concrete Resurfacing Melbourne?
You should contact Granicrete Australia to get the best Concrete Resurfacing Melbourne.